Ampac

Infra Red Transit Heat Sensor

Product Overview

Combustible materials such as coal being transported on conveyor systems have the potential to self-ignite. Early warning protection along a conveyor susceptible to conditions of excessive heat can avoid catastrophic fire damage and substantial consequential losses.

The early warning infrared transit heat sensor is designed to monitor and detect, in the presence of ambient light, ‘hot spots' and embers from materials such as coal, biomass or recycled waste being transported on conveyor systems. 

The Infra-Red Transit Heat Sensor can trigger at temperatures as low as 100°C, when monitoring materials being transported on conveyor systems, before they have reached the ember or flame condition. Its unique dual detector enhanced Infra-red monitoring has been created to detect black heat. Black body emissions occur for all material, the sensor is designed to detect a change in these emissions even at relatively low temperatures, when the material moves through its field of view.

The Infra-Red Transit Heat Sensor is specifically designed for hazardous areas and is IECEx / ATEX approved for Zones 1, 2 & 21, 22.

Air purging from a compressed air feed is used to maintain a lens cleaning system that ensures the prevention of dust settling on the sensor window.

Features

  • Compatible with Ampac ZoneSense, LoopSense and FireFinder Plus panels
  • Detection of hazards at temperatures below flame point
  • Detection of both embers and buried hot spots
  • Single / Coincidence voting output
  • Fault monitored, with Test & Reset push buttons

Specification

Supply Voltage

Relay Mode

Low Power Mode


20 - 30V dc

13 - 30 V dc

MaterialAluminium Alloy LM25
Operating Temperature-20°C to +60°C
IP RatingIP66
Alarm/Trip Contact2 Pole VFCO 
Fault1 Pole VFCO

Purge Air

Input Fitting

Pressure

Typical Delivery


10mm air hose adapter

2.5 psi to 10 psi

30 litres/min


Item Number

Infra Red Transit Heat Sensor4108-4001