ampac-logo-new-01 SoftwareTraining

Marine DIN-Rail Dual Isolator

Apollo Marine DIN-Rail Dual Isolator

The Marine DIN-Rail Dual Isolator provides, in one housing, two independent isolators which sense and isolate short-circuits on loops and spurs. The unit needs to be installed in a suitable enclosure or equivalent and secured using the end stops.

The Marine DIN-Rail Dual Isolator is loop-powered and allows fully isolated spurs. Up to 20 detectors can be installed between isolators.

Certification: ESC, MED, ABS & VNIIPO







    Max Loop Voltage 28 V dc + 9 V protocol pulses
    Max Power Up Time 10 ms
    Operating Temperature -20°C to +60°C
    Humidity 0% to 95% RH (no condensation or icing)
    IP Rating Designed to IP20
    Dimensions 100mm x 107mm x 20mm
    Weight 95 grams

    Please Note: All data is supplied subject to change without notice. Specifications are typical at 24V, 23°C and 50% RH unless otherwise stated.

    55000-770MAR Marine Dual Isolator