ACP-07 Waterproof Conventional Manual Call Point

Product Overview

The Ampac ACP-07 is a re-settable manual call point with unique and innovative features.  It has been designed to obtain maximum visibility, high reliability in operation incorporating a pleasant aesthetic appearance and complies with EN54-11 (red only).

Six modes of operation are achievable simply by choosing the appropriate internal connection terminals.  All these configurations are easily accessed via the screw terminals.  The internal printed circuit board is fully enclosed and protected and incorporates a current limiter that maintains a steady supply to the LED.

The ACP-07 is easily reset using the special key provided that allows a simple twist action to restore the call point to it’s normal operating condition.  The same key is used to access the electrical connection.


  • High visibility indication in alarm condition
  • Easy and economical installation
  • Visible in the dark via the unique luminescent re-settable element
  • Six configurations in one unit design for reduced inventory holding
  • Extremely easy to reset via the robust twist and set key system
  • Surface mount and flush mount options available
  • High impact resistant ABS plastic material
  • Available in red, blue, green, yellow and white




 Surface Mount

Maximum Voltage

 30 Volt

Minimum Voltage*:

4.5 Volt if LED with R1 is chosen

6.0 Volt if LED with R2 is chosen

Current Rating


0 mA

Current Rating (operated)

Resister Values

R1 470Ω

R2 680Ω

18 mA @ 12 Volt – R1

13 mA @ 12 Volt R2

45 mA @24 Volt – R1

31mA A24 Volt – R2

Cable Termination

0.5-2.5 mm²

Operating Temperature




IP rating



ABS / P glass fibre

*below minimum voltage led current is lower than 7 mA

Item Numbers

4105-1031 Red Waterproof (FireSymbol) Conventional MCP
4105-1032 Yellow Waterproof Agent Release Conventional MCP
4105-1033 White Waterproof Emergency Alarm Conventional MCP
4105-1034 Green Waterproof Door Release Conventional MCP
4105-1035 Blue Waterproof Conventional MCP