Ampac

FireView Detector Test Set

Product Overview

FireView provides a unique all-in-one solution for reliable testing of both smoke and heat fire detectors.

To negate the risk of using ladders and scaffolding, the FireView Detector Test Kit has been designed to aid technicians from floor level during the service and maintenance of fire detection systems. FireView can also be used during the system commissioning process to ensure the detection operates to the correct parameters and system design.

FireView contains an affordable and sustainable smoke generation system that eliminates the need for additional spray purchases. FireView offers full prevention to the deterioration of the detector sensitivity while negating residue build-up within the smoke detector. The fan attached to the head of the inspection pole removes any residual smoke remaining inside the detector speeding up the testing process.

The handheld controller incorporates an LED display panel providing alarm activation time, temperature, and battery status.

 

Specifications

FireView Detector Test Kit (4112-1006)
Test Capacity

200 Heat detectors per charge

300 Smoke detectors per 10mL fill (approx. 3000 per 100mL bottle)

Head Dimensions 150mm
Inspection (length) 1.2m to 2.3m
Weight Pole: 1.6kg Controller: 0.6kg
Charging Time Full Charge 5 Hours
Charger Input: 100-240Vac, 50-60Hz, 0.5A

 

FireView Portable Detector Test Kit (4112-1012)
Testable Detector Heat: Rate of Rise Heat Detector, Fixed Temperature Heat Detector
Smoke: Ionization Smoke Detector, Photoelectric Smoke Detector
Option: Analog Type Detector, Unexploded Type (Heat)
Head Size 150mm (Detector Insertion)
Inspection Pole Length Minimum Approx. 127cm / Maximum approx. 250cm. (If longer pole is needed 6m and 10m poles are available upon request.)
Weight 2.3kg
Material Aluminum
Input AC100 ~ 240V 50~60Hz 2A
Output DC12V 2A
Operating Temp Range Approx. 0°C to 40°C
Keeping Temp Range Approx. -10°C to 40°C
Operating Humidity Range Approx. 0% to 85%, No Frost
Smoke Generator Ability Approx. 50 testable based on 1.00ml smoke detector
Battery 14.8V Li-ION
Charging Time Full charge consumes approx. 5 hours
Charger Input: AC 100-240V, 50-60Hz, 0.5A / Output: DC 12V2A
Running Time Up to 5 hours (Duration may vary due to operating conditions; battery has limited recharge cycles and may eventually need to be replaced.)
Tester Ability (One Time of Charge) Approximately 200 Heat Detectors and 300 Smoke Detectors

Item Numbers

4112-1006 FireView Detector Test Kit
4112-1012 FireView Portable Detector Test Kit
4112-1007 Smoke Oil (100ml)
4112-1008 FireView 6M Extension Pole
4112-1009 FireView 10M Extension Pole
4112-1010 FireView Smoke Detector Removal Tool
4112-1011 FireBiew Heat Detector Removal Tool
4112-1013 FireView Replacement Head Unit