Ampac

MultiAmp PSU

Product Overview

The MultiAmp PSU is a general purpose regulated power supply unit.

  • Available in 2A and 3A versions
  • Fault Relay Output
  • Fault indicator and Resettable Buzzer
  • Earth monitoring
  • Available in ABS (BX1)
  • Available in Metal cabinets (BX10) shallow and deep versions
  • 5mm² cable terminals

Features

A set of two 7Ahr batteries may be housed in the BX1 and BX10 standard cabinet and a set of two 12Ahr batteries in the BX10 deep cabinet. (Maximum size based on Ampac battery specifications)

The unit incorporates temperature sensing and compensation whereby a change in ambient temperature adjusts the battery charging voltage. The power supply will signal a Low Batt fault at 21.3 VDC.

Specifications

Mains Supply

190 – 264 VAC

Operating Voltage

27.5 VDC ± 0.2 VDC

Supply Current

2A Current limited (2Amp Version)

3A Current limited (3Amp Version)

Operating Temperature

 0°C to +40°C

Relative Humidity

25% – 75%

Battery Capacity

 

BX1 and BX10

2 x 7Ahr 12V Sealed Lead Acid

BX10 Deep Cabinet

2 x 12Ahr 12V Sealed Lead Acid

Maximum Charge Current

400mA (2A) 600mA (3A)

Fault Relay

NO,C,NC

Contact rating:

1A @ 30VDC

Dimensions:

 

ABS Cabinet

(BX1) 300mm (H) x 360mm (W) x 100mm (D)

Metal Cabinet

(BX10) 300mm (H) x 360mm (W) x 100mm (D)

Metal Cabinet

(BX10 DEEP) 300mm (H) x 360mm (W) x 200mm (D)

Item Numbers

4555-2110

MultiAmp PSU 2A NZ Version (ABS BX1)

4555-2120

MultiAmp PSU 3A NZ Version (ABS BX1)

4555-2210

MultiAmp PSU 2A NZ Version (Metal BX10)

4555-2220

MultiAmp PSU 3A NZ Version (Metal BX10)

4555-2310

MultiAmp PSU 2A NZ Version (Metal BX10 Deep Cabinet)

4555-2320

MultiAmp PSU 3A NZ Version (Metal BX10 Deep Cabinet)

ENC3016-A

BX10 Surround