Ampac

Single Input Output Device

Product Overview

The Ampac Single Input Output Device is designed to interface to a variety of plant control equipment such as door contacts, sprinkler flow switches and fire fan control systems.

The Single Input Output Device incorporates a single pole, voltage free change over relay contact output and a single monitored switch input. The input can be used to supervise one or more normally open contacts connected to a single pair of cables with monitoring provided for both open and short circuit fault conditions. The Input circuit is conditioned with de-bounce circuitry for enhanced noise rejection and is protected against high transient voltages.

The Ampac Single Input Output Device is loop powered and incorporates bi directional isolation circuitry to provide protection against detection loop short circuits. On board LED status indication is provided for service and commissioning purposes, a feature that can be deactivated during normal operation to reduce the current draw on the system.

Two packaging options are available. The ‘DIN Mount’ version enables the device to be mounted onto standard 35mm DIN rail or screwed direct to the back pan of a larger enclosure while the ‘Enclosed’ version allows the device to be surface mounted to a wall.

Features

  • Loop Powered
  • Monitored Input
  • Change Over Relay Output
  • Compatible with XP95 & Discovery Protocol
  • Built In Short Circuit Isolator
  • Low Power Consumption
  • Diagnostic LED Indications
  • Surface Mount Enclosure
  • DIN Rail Mount Option

Schematic

Specifications

Operating Voltage

17 – 28VDC

Max Current at 24V DC

Quiescent Current

Input On

Output On

Total (all on)

 

1.29mA

1.51mA

1.30mA

1.58mA

Output Contact Rating

 1A @ 30V AC or DC

Operating Temp.

 -20°C +70°C

Humidity

 0 to 95% Non-condensing

Dimensions

DIN Mount

Enclosed

(H x W x D)

75mm x 110mm x 25mm

150mm x 200mm x 52mm

Material

Grey ABS

IP Rating

IP44 (indoor use)

 

Item Numbers

4210-0050

Single Input Output Device DIN Mount

4210-0051

Single Input Output Device Enclosed