The XP95 Base Visual Alarm Device (VAD) incorporates a loop powered VAD with a standard intelligent mounting base and is used to signal a fire alarm in enclosed areas.
The VAD self-test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the VAD Base has been switched on a fault signal is transmitted when the device is next polled.
Group addressing is a simple method of alerting an entire area or group of rooms without delay. For systems requiring isolators at every point the built-in isolator saves installation time and cost.
The XP95 Base VAD can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device and is moulded in polycarbonate with stainless steel contacts that accept solid or stranded cables of up to 2.5mm².
- Automatic LED check when VAD activated
- VAD flash rate of 0.5Hz
- Synchronised flash
- Individual & group addressing
- Built in short circuit isolator
- Complies with AS7240-23