Orbis Conventional TimeSaver Relay Base
The Orbis TimeSaver Relay Base incorporates a single-pole voltage-free changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is reset.
- Grouped terminals make wiring easy.
- Two fixing centres.
- LED alignment mark.
- Cable stripping guide.
- Continuity link for voltage testing of zone wiring prior to commissioning.
- Detector locking mechanism.
- Capable of switching up to 30V at 1A.
Approvals: AS 7240
| Operating Temperature | -40°C to +70°C |
| Humidity | 0 to 98% |
| IP Rating | IP23D (indoor use) |
| Size | 100mm Dia x 24mm H |
| Weight | 60 grams |
| 201-0543 | Orbis TimeSaver Relay Base |