Marine DIN-Rail Switch Monitor Plus
The Marine DIN-Rail Switch Monitor Plus is designed to monitor the state of one or more single pole, volt free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.
The Marine DIN-Rail Switch Monitor-Plus provides four input states to the control equipment: 'normal', 'fault', 'pre-alarm', and 'alarm'. The unit has a red LED to indicate an alarm and a yellow LED to indicate a fault condition.
Certification: MED, ABS & VNIIPO
|17 - 28 VDC
|Maximum Current Consumption, at 28 V
|Switch-On Surge, Max 65ms
|LED Off, Switch Input Closed
|LED On, Switch Input Closed
|LED On, Switch Input s/c
|Switch Input Monitored Voltage
|9 - 11 V dc
|-20°C to +70°C
|0 to 95% RH
|Designed to IP20
|110mm W x 107mm H x 20mm D
Please Note: All data is supplied subject to change without notice. Specifications are typical at 24V, 23°C and 50% RH unless otherwise stated.
|Marine Switch Montior Plus