Reach Output Module
The Reach Wireless Output Module has a single fully monitored output circuit which allows simple integration of third-party equipment with the fire detection & alarm system.
The unit is powered entirely from its internal battery supply and is fitted as standard with both a set of change over relay contacts and a 12/24V dc output. The output is capable of supplying power for operating low current third party equipment directly from the internal batteries.
The Output Module has 3 wiring options available. The options are described in the data sheet.
Key Features
- Fully supervised output
- Alarm & Fault condition monitored output
- Bi-directional wireless communication
- Dual channel redundancy
- Five-year product warranty
| Communication Range between Loop-Interface and Devices | 100 m (in open space) | |
| Field Device Radio Frequency Channel Pairs | 22 pairs | |
| Radiated Power | 14 dBm (25 mW) | |
| Battery Type | 2x VARTA CR123A Lithium 3 V, 1250mAh typical | |
| Battery Lifespan | 4 years in normal operation with good signal strength (no dropped messages) | |
| Operating Temperature | -10°C to +55°C | |
| Maximum Relative Humidity | 95% (non-condensing) | |
| IP Rating | IP 65 | |
| Standards and approvals | AS7240.18, AS7240.25 | |
| Dimensions | 136 mm diameter x 96 mm height x 57mm depth | |
| Weight (including batteries) | 270g |
| Reach Output Module | 4110-2104 |