Reach Wireless 916 Loop Interface Module
The Reach 916 Wireless Loop Interface Module provides a bi-directional communications link between the wired XP95 addressable detection loop and the remote Reach wireless detection & alarm devices.
The Loop Interface allows fully intelligent and seamless integration of the wireless devices with the addressable fire detection and alarm system.
Key Features
- Built-in LCD Display
- Physical Navigation Buttons
- 3x Status LEDs: Fault, Configuration, and Power
- Loop-powered
- Built-in Isolator
- Bi-directional wireless communication
- Dual channel redundancy
| Communication Range between Loop-Interface and Devices | 100 m (in open space) | |
| Maximum Number of Connected Devices | 32 | |
| Flash Rate | 0.5 Hz | |
| Field Device Radio Frequency Channel Pairs | 22 pairs | |
| Available Protocol Addresses | 126 (XP95) Loop Interface requires a loop address. Configured during set-up |
|
| Radiated Power | 14 dBm (25 mW) | |
| Line Voltage | 17 V - 35 V (typical 24 V) | |
| Current Consumption | 40 mA peak @24 V | |
| Operating Temperature | -20°C to +70°C | |
| Maximum Relative Humidity | 95% (non-condensing) | |
| IP Rating | IP 65 | |
| Standards and approvals | AS7240.17, AS7240.18,AS7240.25 | |
| Dimensions | 236mm W x 160mm H x 70 mm D | |
| Weight | 700 g |
| Reach Loop Interface Module | 4110-2101 |
| Reach Loop Interface Module (black) | 4110-2121 |