ACP-06 Emergency Alarm Initiating Device
The Ampac ACP-06 Emergency Alarm Initiating Device is a re-settable manual call point that has been designed to obtain maximum visibility and high reliability in operation.
Six modes of operation are achievable simply by choosing the appropriate internal connection terminals. All configurations are easily accessed via the screw terminals. The internal printed circuit board is fully enclosed for protection and incorporates a current limiter that maintains a steady supply to the LED.
The ACP-06 Emergency Alarm Initiating Device is supplied in a choice of either flush or surface mount options. Once fitted the front operating element simply snaps into place and is released using the dedicated test and removal tool supplied with each unit. There is the provision of two cable entry knockouts on the rear plus 2 x 3 pre-marked location points on the top and bottom of the surface mount backbox.
- Easy and economical installation.
- Visible in the dark via the unique luminescent re-settable element.
- Six configurations in one unit design for reduced inventory holding.
- Extremely easy to reset via the robust twist and set key system.
- Surface mount and flush mount options are available.
- High impact resistant ABS plastic material.
| Mounting | Surface & Flush Mount |
| Maximum Voltage | 30 V DC |
| Minimum Voltage | 4.5 Volt if LED with R1 is chosen 6.0 Volt if LED with R2 is chosen |
| Current Rating (Not-Operated) | 0 mA |
| Current Rating (operated): Resister Values R1 470Ω R2 680Ω |
18 mA @12 Volt - R1 13 mA @12 Volt - R2 45 mA @24 Volt - R1 31 mA @24 Volt - R2 |
| Cable Termination | 0.5 - 2.5 mm² |
| Operating Temperature | -30 / +70°C |
| Humidity | 0 - 95% |
| IP Rating | 42 |
| Material | ABS / Perspex |
| Surface Mount | |
| 4105-1018 | White Surface Mount Evacuate Alarm Conventional MCP |
| 4105-1005 | Hinged Safety Cover - No text |
| 4105-1006 | Test Keys (Pack of 10) |