Reach Wireless Input Module
The Reach Wireless Input Module has a single fully monitored input circuit which allows simple integration of third-party equipment with the fire detection & alarm system.
The Input Module adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability. The unit is powered entirely from its internal battery supply. The Reach Wireless Input Module works on an ON/OFF logic and does not rely on any special and/or intelligent communication protocol for its operation (i.e. conventional call-points).
Key Features
- Fully supervised input
- Alarm & Fault condition monitored input
- Bi-directional wireless communication
- Dual channel redundancy
- Five year product warranty
| Communication Range between Loop-Interface and Devices | 100 m (in open space) | |
| Field Device Radio Frequency Channel Pairs | 22 pairs | |
| Radiated Power | 14 dBm (25 mW) | |
| Battery Type | 2x VARTA CR123A Lithium 3 V, 1250mAh typical | |
| Battery Lifespan | 10 years in normal operation with good signal strength (no dropped messages) | |
| Operating Temperature | -10°C to +55°C | |
| Maximum Relative Humidity | 95% (non-condensing) | |
| IP Rating | IP 65 | |
| Standards and approvals | AS7240.18, AS7240.25 | |
| Dimensions | 136 mm diameter x 96 mm height x 57mm depth | |
| Weight (including batteries) | 270g |
| Reach Input Module | 4110-2103 |