XP95 Addressable Cat O Base Visual Alarm Device
The XP95 Base Visual Alarm Device (VAD) incorporates a loop-powered visual alarm device with a standard intelligent mounting base and is used to signal a fire alarm in enclosed areas.
The visual alarm device self-test is achieved by means of an LED monitoring circuit. If the LEDs do not draw current when the VAD Base has been switched on a fault signal is transmitted when the device is next polled.
Group addressing is a simple method of alerting an entire area or group of rooms without delay. For systems requiring isolators at every point the built-in isolator saves installation time and cost.
The XP95 Base Visual Alarm Device can be used either with a detector fitted or with a cap for operation as a stand-alone alarm device and is moulded in polycarbonate with stainless steel contacts that accept solid or stranded cables of up to 2.5mm².
- Automatic LED check when VAD activated
- VAD flash rate of 0.5Hz
- Synchronised flash
- Individual & group addressing
- Built in short circuit isolator
Approvals: AS ISO 7240.23:2014
| Coverage Class | O |
| Flash Colour | White |
| Frequency Flash Rate | 0.5Hz |
| Operating Voltage | 17 to 28 V DC |
| Quiescent Current | 300µA |
| Current Operated | 9mA |
| Operating Temperature | -20° to +60°C |
| Humidity | 0 to 95% (no condensation) |
| IP Rating | 21C |
| Dimensions | 115mm x 30.5mm |
| Weight | 156 grams |
| 4107-2007 | XP95 Base VAD Cat O |
| 201-0114 | XP95 White Base Cap |
| 201-0119 | XP95 Red Base Cap |