Orbis Conventional Marine Relay Base
The Orbis Marine Relay Base incorporates a single-pole, voltage-free changeover contact for switching ancillary equipment. When the detector changes to the alarm state, the relay is energised, causing the content to change state. The contact will remain in this condition until the detector is reset.
- Grouped terminals make wiring easy.
- Multiple fixing centers.
- LED alignment mark.
- Cable stripping guide/
- Continuity link for voltage testing of zone wiring prior to commissioning.
- Detector locking mechanism.
- Contact rating 1 Amp at 30 V.
Certification: BV, ABS, LR, KRS & DNV.GL